Category: Occupational safety and Health administration

my assignment is based on reflecting on character step by step changes from early age of life and how the environment shapes  ones bahavior as they are growing

For this assignment you will write a two-part essay. In Part I, explain the importance of external validity to a research study. Include the following: 
An explanation of the differences between internal and external validity. 
An analysis of the threats to both internal and external validity. 
In Part II of your essay, address the following questions: 
Why is peer review important to your research? 
What criticisms of the peer-review process might impact your research? 
How will understanding the concept of peer review be applied to help you increase your chances of success? 
Support your essay with three peer-reviewed or academically reliable resources from the CSU Online Library. Your paper must be at least three, but no more than four pages in length. The title and references pages do not count toward the page requirement. Adhere to APA Style when constructing this assignment, including in-text citations and references for all sources that are used. Please note that no abstract is needed. 

Complete your
project by following the Unit III Consulting Report template linked above.
Ensure you show your equations and all work for determining answers for all
three scenarios in the project document. You may either formulate the scenario
equations using the Word equation formula toolbar or write out and solve your
equations with answers on a separate paper. Then, take a screenshot of your
work for each scenario using your phone or similar device and insert it as an
image in the document. Make sure your image is clear and legible to read.
No references are
required for this assignment; however, if outside sources are used, please
adhere to APA Style when creating citations and references for this assignment.

The proposals will be evaluated based upon the quality of information provided and the proposed impact on the department. Each committee member shall submit information to support their proposal using the following points:
Provide an introduction as to why you selected this topic for your proposal.
What problem does the grant proposal solve? Provide a problem statement. (The problem is…)
How will this proposal directly impact safety and health within your department or organization? Be specific.
Provide analysis of how this grant proposal can assist with public education and code enforcement. 
How will this proposal help reduce risk to the organization by improving risk management processes? 
What data and research can you provide to support your proposal? Consider illness, injury, fatality, cost examples for your department. Be specific.
Are there any agencies that have implemented similar programs that have led to positive outcomes that you can provide as benchmarks?
Does this grant proposal represent an industry best practice, either now or in the future? Please provide specifics.
Is this grant proposal in alignment with any national or industry standards? If so, please provide specific information.
Please provide any additional information you deem relevant and beneficial for your grant proposal.
There is no need to provide budget information, as that will be developed if your proposal is selected based upon the quality of information you’ve provided.
Your proposal should consist of at least three pages, and you should utilize at least two resources. Adhere to APA Style when creating citations and references for this assignment.

Assignment Content
Part 1: Calculations
Your facility will start a cleaning operation in an open-bay room using a styrene dip tank. You estimate the operation will use 1.5 gallons of styrene each 8-hour shift. You determine the current general air distribution of the room is moderate, but the room layout does not currently allow dilution air to pass directly through the area above the dip tank, creating a zone of contamination over the tank.
You have been tasked with determining the minimum airflow requirement for a dilution ventilation system to maintain the concentration of styrene at the Occupational Safety and Health Administration (OSHA) permissible exposure limit (PEL) of 100 ppm. You will find the formula for the calculation in the Ventilation Systems Calculations PowerPoint presentation for the unit. Please note that the PowerPoint Presentation includes notes. You need to calculate the number of pints per hour using the above information.
The steps are listed below:
For the purposes of the room setup, assume standard temperature and pressure (STP).
You need to research the chemical to find the specific gravity and molecular weight.
You must choose a value for K based on the information provided.
Provide an explanation for the value you choose for K.
Calculate the minimum airflow for a dilution ventilation system for the work area. Show all your calculations.
Include a recommendation for the placement of any supply and exhaust fans in the work area.
Provide your opinion about the feasibility of providing the calculated level of dilution airflow in the work area.
Part 2: Recommendations
Your second task is to recommend a local exhaust ventilation system for the operation as a second option. The dip tank has the following dimensions: 2 feet (width) by 5 feet (length) by 2 feet (depth). Based on the recommendations in the American Conference of Governmental Industrial Hygienists (ACGIH) manual, you decide that a capture velocity of 100 ft/min would be adequate for the operation.
Specify which hood type you would use, the size of the hood opening, and the duct diameter you would recommend for the operation. State the distance you would place the hood opening from the work. Calculate the required airflow for that size hood and the capture velocity of 100 ft/min. The formula for the calculation can also be found in the presentation for the unit. Be specific about where the hood will be placed in relation to the dip tank and worker and what treatment, if any, will be used for the exhaust. If you will not recommend any treatment for the exhaust, state why you do not believe treatment is necessary and where you would release the exhausted air.
Your completed assignment (Parts 1 and 2 combined) must be at least three pages in length, not counting a title page and a reference page. An abstract is not needed. Include at least three reliable sources. One of the sources must be from the CSU Online Library. Use correct APA Style for in-text citations and the reference page.

research paper requirements can be found in the attachment below. I also included an attachment of a brief discussion over the same chemical group that might help.