Category: Engineering

Ask about mechanics and relative field
Important Info
The order was placed through a short procedure (customer skipped some order details).
Please clarify some paper details before starting to work on the order.
Type of paper and subject
Number of sources and formatting style
Type of service (writing, rewriting, etc)

Hello
i have an assignment with two parts
Part 1 : Section I – Design Issues (600 words)
1.Devise a programme in the form of a Gantt chart following the RIBA plan of works for the consultation and design of the project only showing clearly all-time constraints prior to construction. 2. Analyse and provide financial data supporting and justifying cost implications at design stage only for the project.
3. Specify & discuss how Building Information Modelling (BIM) can be applied to this project.
Maximum score20
Section II – Environmental & Stakeholder Management (600 words)
1. An overview of the environmental issues affecting the construction & operation of the project. 2. A detailed report supporting the process in which public concerns will be addressed. 3. Evaluate how Low Carbon Planning helps to integrate energy efficiency and renewable energy sources cost effectively into the new development. (e.g. identify the measures used to minimising construction waste, embodied energy and carbon emissions, in low carbon energy design and planning)
Maximum score20
Section III – Construction Planning (600 words)
1. The choice of construction methods and logistics for the redevelopment to reduce carbon emission and reduce pollution. 2. Discuss Health and Safety obligations and provide detailed method statements supported with pictorials for the construction of the major elements of the works, these must be project specific.
3. An outline programme (Gantt chart user friendly) for the works for the key elements (manually or software based) identifying critical activities & resource smoothing opportunities.
Maximum score20
Section IV – Economic & legal Issues (600 words)
1. Present an economic evaluation of the financing of the Infrastructure and the likely costs.
2. Discuss the geotechnical issues that need to be addressed within this scheme which will affect the design and cost. 3. Advise the client on the following: a. The different methods for “Dispute Resolution” if disputes arise? b. The role of a professional in the built environment (e.g. engineer, architect, project manager etc.) as an expert witness?
Maximum score20
Section V – Procurement Methods & Supply Chain Matters (600 words)
1. Select & justify the most appropriate procurement method for this project in terms of the contractual obligations. Explore the implementation of the innovative collaborative procurement approach to de-risk the construction. 2. Analyse the structure of the UK economic in terms of procurement methods & supply chain matters and demonstrate a critical awareness of the economic role played by the civil engineering construction industry. 3. Describe how Quality Assurance System ensures the best practice in managing the construction of the development. Propose practical measures that can be utilised by contractors to ensure that the client achieves a project that is ‘fit for purpose’ and best value for money’
Part 2 :
Critical Reflection (1000 words)
Ability to reflect critically on the way you research
Maximum score30
Resources
ability to use libraries and electronic sources;
Maximum score10
Knowledge
ability to think critically about what you are reading;
Maximum score20
Critically reflect on research process
understanding the research process;
Maximum score20
Critically reflect on writing process (200 words)
understanding the writing process.
Maximum score10
Formatting and Referencing (list of references not included in word count)
High quality presentation of the material that conforms to principles of academic writing and contains minimal errors in sentence construction, grammar and punctuation. The assignment followed appropriate academic conventions regarding in-text citations and referencing.
Maximum score10
Part A: Case Study, worth 80% of the total module mark
Part B: Reflective Log, worth 20% of the total module mark

I want research a about ( Mindfulness in interior spaces) from page 12 For this requirement: Design Research Introduction. Research Methods Identification. Research Questions Development. Validity and Reliability of Research and Methodology. Data Analysis Quality and Relevance of Findings. Writing, Oral Presentation and Documentation. Defending and Ability to Conduct Discussion
Questionnaire on the topic
In

Hello, this is a thesis that has been discussed and comments are being received for modification. I will send 4 files that will be numbered and this is an explanation for each of them: 
The file with name (
construction waste management framework Thesis final end )  is the original file that was discussed (the file before the discussion).
The file named (Firas Thesis Dr Othman) is the file that I obtained from the committee and contains the comments
The file named ( Firas Thesis Dr Othman (2))is the file that I modified, and it is what I need you to work on and add modifications to this file.
The file named (Required modifications) is a file of the modifications I want, and they are simple modifications

I am in a group that is supposed to write a Literature Review about “Vibrations in Offshore horizontal axis wind turbine (HAWT) due to aerodynamic and vortex induced disturbance”. I am assigned to write only ONE BODY PARAGRAPH that should explain Tuned Damping Approach and Tuned Mass Damper Inerter(TMDI) and use these 2 literatures to review:
https://doi.org/10.1016/j.engstruct.2020.110928
https://doi.org/10.1002/stc.2471
I want to emphasize again that I only want one body paragraph to be written which should be 500-600 words. The files that I share with you contain the annotated bibliography(i highlighted the parts that you should look at) that we made as a group so you can look at those writings to have a clear understanding about what and how to write the body paragraph. I also shared the instructor’s rubric and the prompt.

What is the primary objective of civil engineering?
a) Designing electronic circuits
b) Designing and constructing infrastructure
c) Developing software applications
d) Conducting medical research

1. (Slide 2) find eigen values and eigen vectors for the first given matrix.
2. (Slide 2) Find eigen values and eigen vectors for the second given matrix.
3. (Slide 3) Examine manually and using Matllab the symmetric eigen decomposition, if any, for each of the matrices of (slide 2.) Are they diagonalizable? Explain your results in detail. 4. (Slide 3) Examine manually and using Matllab the symmetric eigen decomposition, if any, for each of the matrices of (slide 2.) How about the eigenspace for each case? Explain your results.
5. (Slide 4) Using given matrix for SVD on slide 4, Show all the steps of the SVD of the matrix A manually and using Matlab. Typically, the singular values arranged in decreasing order.
6. (Slide 5) Find manually and repeat using Matlab the matrix P such that E.S. x=0 is asymptotically stable for systems shown on slide 2. Assume Q=I. Explain the difficulties you confronted in finding P and how that might affect the stability.
7. Repeat for system of L(slide 4) but only using Matlab. Interpret your results and reason behind their differences. How these results differ from those of the above bullet?
8. Use (slide 6) as a guiding example.
Please show all work and verify its correctness. Also list any references.

solve depending on this letter
the THIRD letter is h and the second letter is O
I hope write it clearly and if it in paper I really appreciate that

Task Specification
You will take the role of a consultant
employed by the developer of a new generation project. This document contains
information about the electricity supply system for three countries and a range
of electricity generation technologies. Your client wishes to develop a new
project using in one of these countries using a specific technology with a
defined capital budget. Your task is to carry out an appraisal, including
financial and non-financial aspects to specify the project. Your appraisal
should:
• Provide your client with an overview
of the physical process which the technology uses to generate electricity
• Determine the viability of the
business case for the project using appropriate metrics
• Identify its role within the system
and any risks or wider issues associated with the project.
While the specified technology is the
preferred option, your client is open to alternative proposals if these would
provide a better return on their investment and/or better meet the needs of the
system. You should propose an alternative project by:
• Assessing the role fulfilled by the
existing generators in the system and to what extent they meet the system needs
in terms of a) supplying the baseload, intermediate, and peak demand; and b)
ensuring an affordable, sustainable, and reliable supply of electricity.
• Identifying any gaps in the existing
system
• Identify an alternative technology
which can help to address these issues.
Report specification
Report sections (Marks available shown
in brackets. A further 10% is available based on the quality of presentation
and evidence)
Title page
Include your name, student number,
module title, date of submission, and report title
Introduction (5%)
Briefly outline the purpose and content
of the report
Technology description (10%)
Explain the operational principles the
technology which you are assessing. Provide a diagram which shows the energy
flows into and out of the generator.
Financial appraisal (25%)
Use the financial appraisal methods
covered in the course to quantify the costs and benefits of the project over
its lifetime. You should calculate the lifetime cost, cost-benefit ratio,
payback period, internal rate of return, and levelized cost of electricity. The
price of electricity should be estimated based on the current market conditions
within your system. Present your results in a table with brief discussion, and
provide details of the calculations in an appendix.
Non-financial appraisal (10%)
Discuss factors other than purely
financial considerations that your client should be aware of. Consider at least
the environmental, social, and political circumstances surrounding these
technologies.
Assessment of System Needs (15%)
Does the current generation mix meet the
needs of the system? Provide an assessment of the system needs in terms of:
• Affordability
• Sustainability (including CO2
emissions)
• Security of Supply
• Operability
Alternative technologies (15%)
Provide a brief review of an alternative
technology which would better meet the needs of the system. Identify the key
differences between this and the technology specified by your client.
Recommendation (10%)
Advise your client on what they should
do next and identify any uncertainties in your appraisal that should be
assessed in more detail to gain a more complete picture of the decision to be
made. Use evidence from the report to justify your recommendation.
Word
count and non-text elements
Word count: 1500 words. Only the main
text is included in this count; the title page, table of contents, references,
and similar parts are excluded.
Non-text elements, consisting of
diagrams, graphs, and tables, need to be included to provide information that
cannot be conveyed effectively through words alone. Note that these elements
are essential to include so that your ability to present information in these
ways can be assessed.
Clear
and concise writing
It is essential that you communicate the
information in your report:
Clearly
– use an effective structure, use descriptive figure captions, ensure
nomenclature is defined and consistent, define the symbols used in equations.
Concisely
– ensure that you use as few words as possible to unambiguously explain your
work, use effective referencing to build on the work of others, do not repeat
similar information at multiple places in your report.
Elements of knowledge and skill being
assessed
Whilst this task is intended to feel
authentic, remember that it is designed to assess the knowledge and skills
listed below. Critically review your work to check that you have demonstrated
your learning for each of these and modify the report of necessary.
1. Concepts of heat, temperature,
energy, and power. How they are used to express energy system properties and
performance.
2. The correct way to express physical
quantities (including those above) across a wide range of magnitudes in the
International System of units (SI).
4. The effect of the time value of money
on investments in long-term projects, as characterised by energy system
technologies.
5. Project financial appraisal measures;
lifetime cost, cost-benefit ratio, payback period, internal rate of return,
unit production cost.
6. Fundamental concepts in power
systems; supply & demand, availability, security of supply, reliability,
capacity factor, capacity margin.
7. How existing generation and demand
dictate the role of existing and future generation within an electricity supply
system.
8. How power generation projects can
contribute to the economic, sustainable, and reliable operation of an
electricity supply system.
9. Exploitation of renewable energy
resources with consideration of; availability, system integration, economic,
social, and political factors.
System to study: 1
Technology to study : 
Wood pellet Biomass
Project Data (Please read the attachment)
Need to get 60 points or above

Rewrite and organize the research paper, and make sure to rewrite it in a more human way since most of the writing was from ChatGPT. Also, try to make the writing more understandable.